| Customization: | Available |
|---|---|
| Reflective Material Type: | Glass Beads |
| Material: | Thermoplastic Resin |
|
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Product Name | Hot melt Preformed Road Marking Tape | Model Number | TR-PMT |
| Thickness | about 2.0mm | Retro-reflecting coefficient | 250min. for white color |
| Brief introduction | |||
| Hot melt road marking tape is a kind of pre-formed thermoplastic road marking products, construction by heating can be firmly attached to the ground, to ensure its long service life, under the same road surface conditions, is the ordinary normal temperature road marking life of 6-8 times, is the ordinary hot melt road marking life of 3-4 times. At the same time, because of its very convenient prefabrication, it can be used to accurately make various types of arrows, text and a variety of complex multicolor patterns. In construction, the method is simple, fast, low technical requirements, and can greatly save construction manpower and material resources, is widely used in various places of the ground signs. Because of the relatively low cost of line marking in its life cycle, it is increasingly used for general road traffic line marking. | |||
1.It can be firmly attached to the ground after hot melting at high temperature, with stronger durability and lower requirements for pavement flatness.
2.The surface of tape can be firmly attached to glass beads with high roundness and high refractive index. The best degree of glass bead embedding in tape ensures stronger and more durable reflective effect.
3.Various types of arrows, text and various complex multi-color patterns can be accurately prefabricated.
4.The construction method is simple, the construction speed is fast, the professional and technical requirements are low, and the construction cost is relatively saved.
5.Excellent flexibility, maximum extent to avoid marking cracking.
6.With similar skid resistance to the road surface, the application range is more extensive.
| Item | Standard | Result | Testing Method |
| Thickness, | 0.3-2.5mm | 1.9 | ASTM-D-4325 |
| Tensile strength | 500psi | 500 | ASTM-D-4325 |
| Elongation at break | 40% | 40 | ASTM-D-4325 |
| Initial retro-reflecting coefficient(White Color) | ≥250mcd·1m· |
430 | GB/T24717-2009 |
| Water resistance | Soak in water for 24h, there should be no abnormal phenomenon. | Qualified | JT/T493-2003 |
| Alkali resistance | Soaked in saturated calcium hydroxide solution for 24h, there should be no abnormal phenomenon. | Qualified | JT/T493-2003 |
| Abrasive resistance (Weight loss after 200rpm /1000g) |
≤60mg | 10.5 | JT/T493-2003 |
| Adhesion property | 30,N/25cm | 30 | JT/T493-2003 |
| Sliding resistance | 45BPN | 45 | JT/T493-2003 |
General road line marking; Warning of dangerous area; Ground signs or advertisements of various places, such as: traffic facilities, stations, airports, wharves, toll stations, parking lots, sports venues, schools, parks, fire escape, restricted areas, disabled accessible access, railway stations, hospitals, parking lots, public facilities, etc.
1. Clean the surface of the road;
2. Apply the primer on the ground(It is recommended), and put tape on the surface;
3. Heat with a flame gun until softened and can be attached to the ground.
1. Enterpise Scale
){kind=link}